EH&S — Health, Safety & Environment

Every EH&S — Health, Safety & Environment course in the Zentrum24 Academy library. Read the first two pages of any of them free.

• Biological Waste Management and DisposalSegregating, labelling, storing and manifesting biohazardous waste — from bench collection to the licensed hauler, and the records each step leaves behind.
• Bloodborne Pathogen (BBP) Exposure Control and Safety ProtocolBloodborne pathogen exposure control: engineering controls, safe work practice, hepatitis B vaccination, and the first minutes after an exposure incident.
• Chemical Spill Response and Reporting ProtocolSizing a spill, choosing between incidental cleanup and emergency response, containing it safely, and reporting it so the investigation has what it needs.
• Confined Space Safety and Entry Protocol in Sterile ManufacturingIdentifying permit-required confined spaces, atmospheric testing, entry permits, attendant and rescue duties, and how entry work is controlled on site.
• Cut and Puncture Prevention in Sterile ManufacturingWhere cuts and punctures actually happen in sterile operations — ampoule breakage, glass handling, blades and needles — and the controls that prevent them.
• Medical Surveillance and Occupational HealthWho is enrolled in medical surveillance and why: exposure-triggered exams, respirator clearance, hearing and potent-compound programmes, and confidentiality.
• Electrical Safety and Safe Work PracticesQualified versus unqualified persons, approach boundaries, arc flash risk, energised work permits, and safe work practice for electrical tasks on site.
• Elevated Surfaces and Fall Protection Safety (DP-MFG-FACILITY)Working at height: guardrails, personal fall arrest, ladder and platform rules, anchorage selection, and rescue planning done before the work starts.
• Emergency Action Plans (EAP) and Safety Protocols for Sterile Manufacturing FacilitiesWhat an emergency action plan must cover — alarms, evacuation routes, assembly and accountability, critical shutdowns — and your role when one is activated.
• Fixed Machine Safeguarding and Guarding CompliancePoint-of-operation hazards, guard types and interlocks, safe distance and reach, and what to verify before a guarded machine is released back to production.
• Hazard Communication and Chemical Safety in Sterile ManufacturingReading a safety data sheet, GHS labels and pictograms, secondary container labelling, and the chemical inventory that ties the whole programme together.
• Hazardous and Universal Waste Management for Sterile ManufacturingClassifying hazardous and universal waste, satellite accumulation limits, container and labelling rules, and the manifest trail a compliant shipment leaves.
• Hazardous Energy Isolation and Lockout Safety Protocol (LOTO)Isolating every energy source before service: written procedures, lock and tag application, stored-energy release, verification, and group and shift transfer.
• Hearing Conservation Program Standards at DP-MFG-FACILITYNoise monitoring, what triggers a hearing conservation programme, hearing protector selection and fit, audiometric testing, and standard threshold shifts.
• Hot Work Safety and Permit Procedures in Sterile ManufacturingHot work permits, fire watch duties, combustible clearance and covering, gas testing, and the post-work monitoring period before the permit can be closed.
• Interstitial Work Safety and Ceiling Protection GuidelinesWorking above the cleanroom ceiling — load limits and walkways, protecting the grid and HEPA seals, and keeping the classified room below unaffected.
• Laboratory Chemical Hygiene and Safety ComplianceThe chemical hygiene plan in practice: fume hood use, incompatible storage, designated areas for select carcinogens, and exposure assessment in the QC lab.
• Laboratory Chemical Waste Handling and Disposal ProtocolSegregating and characterising laboratory chemical waste, satellite accumulation containers, labelling and compatibility, and hand-off to the disposal vendor.
• Laboratory Safety and Hazard Containment ProtocolsBiosafety levels and containment practice, biological safety cabinets, aerosol-generating procedures, decontamination, and spill response in the laboratory.
• Laboratory Sharps Handling and Disposal ProtocolNeedles, blades, broken glass and ampoules — safe handling, engineered sharps controls, approved containers, fill limits, and disposal without a single recap.
• Occupational Ergonomics and Musculoskeletal Disorder (MSD) PreventionRecognising ergonomic risk in gowning, filling and inspection work, early MSD symptoms, workstation adjustment, and raising a concern before injury.
• Personal Protective Equipment (PPE) Safety Standards and SelectionThe hazard assessment that drives PPE selection, the limits of each class of protection, donning and doffing order, inspection, and when PPE is replaced.
• Potent Compound Categorization and Safety Handling ProceduresOccupational exposure bands and OEL-driven containment, categorising a potent compound, engineering controls, PPE, and cleaning verification after handling.
• Powered Industrial Truck (PIT) Safety and Operating ProceduresOperator qualification and evaluation, pre-use inspection, load stability and capacity, pedestrian traffic rules, and battery charging in a GMP warehouse.
• Protective Eyewear and Footwear Policy in Manufacturing EnvironmentsWhere eye and foot protection is mandatory, selecting for the actual hazard, prescription and visitor eyewear, and the inspection that keeps it effective.
• Respiratory Protection and Safety Standards in Sterile ManufacturingRespirator selection by hazard, medical clearance and fit testing, user seal checks, cartridge change schedules, and the written programme behind all of it.
• Safe Handling of Compressed Gas and Compressed Air SystemsCylinder storage, securing and transport, regulator and valve handling, inert-gas asphyxiation risk, and safe work on pressurised compressed air systems.